This USB programming cable is made to connect your Alinco products with a
Windows PC to use Alinco utility software for programming, editing and saving
the data. This cable is identical to the ICOM OPC-478U and Alinco ERW-7. Prior
to start using the cable, it is required that you install a driver-software in
the product. The details of the driver software is in the adjunct CD.
We
are sorry, but we don't support a step-by-step installation assistance of this
driver software by phone or any other means.If you are not sure this device is
usable or not with your PC system, we recommend you to use our serial port
OPC-478 or ERW-4C programming cable that does not require a driver
installation. This programming kit is not a straight forward cable, there is an
internal converter circuit board mounted in an USB plug.
ICOM OPC-478U,This programming cable provides
quick and easy programming of the following Icom radios: IC-F110,
IC-F110N, IC-F110S, IC-F121, IC-F121S, IC-F1710, IC-F1721, IC-F1721D, IC-F1810,
IC-F1821, IC-F1821D, IC-F210, IC-F210S, IC-F221, IC-F221S, IC-F2710, IC-F2721,
IC-F2721D, IC-F2810, IC-F2821, IC-F2821D, IC-F500, IC-F510N, IC-F520, IC-F521,
IC-F610, IC-F610MPT, IC-F610N, IC-F620, IC-F620TR, IC-F621, IC-F621TR
etc...
Alinco ERW-7,This programming cable provides quick and easy
programming of the following Alinco radios: DJ-191,
DJ-193, DJ-195, DJ-196, DJ-296, DJ-396, DJ-446, DJ-493, DJ-496, DJ-593, DJ-596,
DJ-C6, DJ-C7, DJ-S17 (EDS-10 is required), DJ-S47 (EDS-10 is required), DJ-V17
(EDS-10 is required), DJ-V47 (EDS-10 is required), DJ-V5, DJ-X10, DJ-X2000,
DJ-X3, DJ-X7, DR-135, DR-235, DR-435, DR-620, DR-635, DX-77
etc...
You will find that when you purchase our programming
cable you will possibly never need to replace it. This cable is extensively
tested at time of manufacture to be free of defects. This cable does not include
any manuals or instructions for use.